Learn Advanced PCB Layout
Online course - Learn from your Home
Click here
LEARN PCB DESIGN by practicing on iMX6 Rex design files. You will learn everything important about routing PCB Layout including layout for high speed interfaces such DDR3, PCIE, SATA, Ethernet, HDMI, LVDS, etc. Read more >

Announcement

Collapse
No announcement yet.

Ground Pins of IC

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ground Pins of IC

    Since the ground pins of ICs are internally short. So, what would be prefer in hardware design for providing ground to IC. i.e. provide ground to all the gnd pins or only 1 pin. ( keeping in view that ic has a lot of ground pins).

  • #2
    It's better to connect all the GND pins.

    Comment


    • #3
      All the GND pins of any chip should be always connected to ground.

      Comment


      • #4
        But that jumbles up the routing. Altium does not make connections only to the ground plane. Rather it asks for the pin to pin connections as well. Any advice for this issue?

        Comment


        • #5
          To do PCB layout properly, it can be sometimes very difficult.

          I am not sure what you mean by "it asks for the pin to pin connections", but maybe, have a look at some of my videos, they can help: https://www.youtube.com/watch?v=hmD4...RZOlYaK3VimeLE

          Comment

          Working...
          X