Don’t design PCB without watching this!
Watch how signals are travelling through a PCB. Thank you very much Yuriy Shlepnev.
Chapters:
- 00:00What is this video about
- 00:32Fields for THICK 2 Layer PCB (1mm / 40mil)
- 04:47Fields for THIN 2 Layer PCB (0.1mm / 4mil)
- 08:44Fields size compared 1mm vs 0.1mm
- 09:11Crosstalk, fields, currents for 2 Layer PCB (two tracks)
- 16:56Currents in track
- 21:24Comparing crosstalk in numbers (2 layer PCB)
- 27:43Crosstalk for 5W gap between tracks
- 35:45About Simbeor simulation software
- 40:57Fields inside of PCB for one track
- 45:00Fields size compared (symmetrical vs. not symmetrical)
- 45:52Crosstalk, fields, currents inside of PCB for two tracks
- 49:25Comparing crosstalk in numbers (inside PCB)
- 56:29Comparing 2 layer vs inside PCB crosstalk for 5W
- 1:00:44Animation of signal travelling through track
- 1:04:54Animation - Moving tracks further from each other
- 1:07:14Signals running through both tracks
- 1:10:14Adding GND track with 2 vias between tracks
- 1:12:12Adding many vias only
- 1:13:37Adding many vias and track
- 1:17:12Importing a real board to Simbeor and analyzing crosstalk
